Jump to content
  • 0

Tvt Event Interlude


LineageTeardrop

Question

Hello,

 

I have L2OFF Vaganth Extender. Can any1 help me with settings of TvT?

I know all is in extender how you say but I have one problem...

 

If I open IlExt.ini I have this setting for TvT...

[TvT]
;0- disabled, 1- enabled
Enabled = 1
;Start day time (default 14:30 aka 2:30 pm)
StartTime = 14:30
;Registration time in seconds
RegistrationTime = 900
;Fight duration in seconds
FightDuration = 900
;Team player limit default 18 (2 pt vs 2 pt), 0 - unlimited
MaxTeamSize = 30
;Minimal amount of players in team
MinTeamSize=2
;Minimal level required to register
MinLevel=40
;Max level
MaxLevel=80
;Repeat event count, default 2 (so it will start at 14:30, 16:30 and 18:30 )
Repeat = 2
;Repeat event delay in seconds (it will add delay to start time), default 2 hours
RepeatDelay = 7200
;Item reward id and count
RewardId = 11092
RewardCount = 1
;Blocked skill list separated with space
BlockedSkill = 0
;Dispel buffs on enter
DispelBuffs = 1;
;spawn loc x/y/z
Team1Pos = 148567/46710/-3408
Team2Pos = 150357/46710/-3408
;Manager name used in announce and system messages
ManagerName=TvTEventManager
 
because this position for team 1 and team 2 are in Coliseum I want change it to new area.
 
So If I change it for example to Narshel Lake Fortress (near Coliseum)  Team2Pos = 154743/53816/-2968
 
Team is teleported to X great so to: 154743 position.
But Y is still same as beafoure change so 46710.... any1 know why is it still same and how change it to what I want?
 
Thank you.
 
Link to comment
Share on other sites

15 answers to this question

Recommended Posts

  • 0

Use /loc to find the correct location ? And reload the TvT configuration ?

Just a little picture so you understand how 3 Dimensional areas work.
 

0_xyz-coordinates.png

 

Y will be still the same because the height of the spawn point didn't changed.

Edited by Sighed
Link to comment
Share on other sites

  • 0

Use /loc to find the correct location ? And reload the TvT configuration ?

 

Just a little picture so you understand how 3 Dimensional areas work.

 

0_xyz-coordinates.png

 

Y will be still the same because the height of the spawn point didn't changed.

 

Hi,

yes I use the /loc via picture: dm-814116522240.png

 

so I giving to extender this parameter:

Team2Pos = 154743/53816/-2968

 

One question how you think "reload the TvT Configuration"?

I changed this number in extender and save it. After it restart server and spawn of TvT was changed but to bad position.

154743/46710/-3432

 

to your picture ... X is left and right on L2 map

Y is up and down on L2 map

Z is hight of depth on L2 map.

 

so in extender if I cant change Z is it no problem but X,Y are most important to good spawn position.

Link to comment
Share on other sites

  • 0

After you set your locations/reward id's and amount, just set the date/hour as you want and reload the TvT from the l2server.exe app check its options.

Link to comment
Share on other sites

  • 0

After you set your locations/reward id's and amount, just set the date/hour as you want and reload the TvT from the l2server.exe app check its options.

 

Set in extender new position, saved, restarted server, in option inicialized TvT and stil ported to: 154743/46710/-3432 

 

Any idea?

Link to comment
Share on other sites

  • 0

When you purchase an extender - and you find an extender bug - its common to post in said extenders forum about said bug instead of a random related development forum.

 

Obviously something goes wrong in reading the locs - and it goes back to it's standard values.

At first i'd have geussed on wrong string-key but since it changes back - it's a direct error by Dawid most likely.

Edited by mcbigmac
Link to comment
Share on other sites

  • 0

Set in extender new position, saved, restarted server, in option inicialized TvT and stil ported to: 154743/46710/-3432 

 

Any idea?

There is no bug, you are just doing something wrong,

Open the tvt.ini file, set the time based on the machine GMT, and set location to x y z, go to x y z, lets say your hour is 07.00 , set the tvt for 07.03, do not restart the whole server,, that is useless, open your l2server window, click on extender, click on reload tvt.

BUT make sure you got a NPC spawning there, and you set the right ID for the npc.

It must work, there is no bug with the TVT, i am using it and its working perfectly.

If you need any assistance i can gladly support.

Link to comment
Share on other sites

  • 0

There is no bug, you are just doing something wrong,

Open the tvt.ini file, set the time based on the machine GMT, and set location to x y z, go to x y z, lets say your hour is 07.00 , set the tvt for 07.03, do not restart the whole server,, that is useless, open your l2server window, click on extender, click on reload tvt.

BUT make sure you got a NPC spawning there, and you set the right ID for the npc.

It must work, there is no bug with the TVT, i am using it and its working perfectly.

If you need any assistance i can gladly support.

 

Hmm ..

Here is a problem ... I dont have in server "tvt.ini" file... I have all in IlExt.ini ... all what u can see im my first post here is in this file.

Another files with name TvT are html files ofc and nothink more....

 

I will be glad if you can help me solve this problem :)

My Facebook page in your PM ... I think better comunication then here :)

Ah .. you are full of a msg... so pm me your fb and I add you :)

Edited by LineageTeardrop
Link to comment
Share on other sites

  • 0

So in otherwords your using a cracked - old - leaked version - and you wonder why shit might not work the way it does in a licensed updated version?

 

Sorry I was not Administrator in start this project now Im Admin alone and really don't know if is it cracked or not. If Yes and not function it in cracked version I can understand and lock this topic ... I only ask for answer ... 

Link to comment
Share on other sites

  • 0

Sorry I was not Administrator in start this project now Im Admin alone and really don't know if is it cracked or not. If Yes and not function it in cracked version I can understand and lock this topic ... I only ask for answer ... 

You buyed the files or downloaded from some site?

Link to comment
Share on other sites

  • 0

You buyed the files or downloaded from some site?

 

I realy dont know I just not speak with friend who started this server ... he make him online to beta and leave server and all comunication is with him without chance. 

 

So I realy dont know how he get it.

Link to comment
Share on other sites

  • 0

I realy dont know I just not speak with friend who started this server ... he make him online to beta and leave server and all comunication is with him without chance.

 

So I realy dont know how he get it.

Check what version is on dll.
Link to comment
Share on other sites

  • 0


<html>

<head></head>

<body>

<center><font color="LEVEL">[ Team vs Team ]</font></center><br>

<img src="L2UI_CH3.onscrmsg_pattern01_1" width=300 height=32 align=left><br>

<br>

<center>

<table width=300 align=center>

<tr>

<td width=150 align=center>Team Blue</td>

<td width=150 align=center>Team Red</td>

</tr>

<tr>

<td width=150 align=center><button value="Register" action="bypass tvt_register?team=1" width=75 height=21 back="L2UI_ch3.Btn1_normalOn" fore="L2UI_ch3.Btn1_normal"><br><br></td>

<td width=150 align=center><button value="Register" action="bypass tvt_register?team=2" width=75 height=21 back="L2UI_ch3.Btn1_normalOn" fore="L2UI_ch3.Btn1_normal"><br><br></td>

</tr>

</table>

<button value="Unregister" action="bypass tvt_unregister" width=75 height=21 back="L2UI_ch3.Btn1_normalOn" fore="L2UI_ch3.Btn1_normal"><br>

<br>

<img src="L2UI_CH3.onscrmsg_pattern01_1" width=300 height=32 align=left><br>

</center>

</body>

</html>

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...